Skip to main content

T7™ Multi-Mission Robotic System

Modern Robotic User Interface Providing Unmatched Command and Control

T7’s highly intuitive interface redefines ease of use with immersive force feedback, providing unmatched command and control. Its precision control and human-like dexterity shorten task completion time and improve mission effectiveness.

The T7 robot system has the strength and dexterity to tackle any challenge. Its rugged, automotive-grade track system provides outstanding mobility and maneuverability. A variety of attachments enable use of standard-issue sensors, disruptors, and tools, supporting a wide range of commercial and military missions, including HAZMAT and vehicle-borne improvised explosive device (VBIED) defeat. In the configuration shown, T7 includes a pan, tilt, and zoom (PTZ) camera mast, high power multiple-input and multiple-output (MIMO) radios.

L3Harris T7 Robot Controller

Revolutionizing Robot Control

L3Harris’ cutting-edge intuitive motion control and haptic feedback make operating T7 as natural as moving one’s hand.

T7 Robot Specifications

Platform
Weight 710 lbs (322 kg) (with arm and batteries installed)
Dimensions (L x W x H) 47.3 x 27.6 x 45.7 in (120.1 x 70.1 x 116.1 cm)
Power 8+ hour runtime (depending on task)
12 BB-2590 batteries
Speed 5+ mph (8+ kph)
Mobility Skid steer track system
Climbs stairs and slopes over 45°
Traverses lateral slopes over 30°
Cameras 2 driving cameras (front, rear)
PTZ mast camera with 120x zoom
Zoomable gripper camera and mid-arm camera
4 fender-mounted corner cameras
Radio LOS range: 3300+ ft (1000+ m)
NLOS Range: 1000+ ft (300+ m)
Environmental -4°F to +140°F (-20°C to +60°C) operational
EMI-shielded for use with active jammers
Maximum fording depth: 10 in (25.4 cm)
IP56 sealed
Manipulator
Reach 87 in (2.2 m) horizontal; 122 in (3.099 m) vertical
Lift Capacity 250+ lbs (113+ kg) near chassis; 60+ lbs (27+ kg) at full extension
Gripper Force-sensing gripper with non-conductive wire cutter
Disruptors Supports up to 4 total disruptors, including up to 2 large disruptors (PAN, PIGSTICK, HOTROD, RE70, etc.)
Haptic Controller
Weight 35 lbs (16 kg) (including battery)
Dimensions (L x W x H) 18.7 x 16.2 x 9.2 in (47.5 x 41.0 x 23.4 cm)
Power 4+ hour runtime
1 BB-2590 or external 24-30 VDC power
Controllability Manipulator presets (standard and user-defined)
Manipulator motion rewind function
Audio/video Daylight-visible display

Resources

  • L3Harris T7 Robotic System

    T7 Multi-Mission Robotic System Brochure

Related News

L3Harris' Lou Speaight at the Women in Defence UK Awards 2024 ceremony

Editorial | 11. 27. 2024

L3Harris’ Lou Speaight is a Finalist at Women in Defence UK Awards 2024

Louise Speaight, Director of Strategic Marketing and Communications at L3Harris, was nominated by her peers for the Women in Defence U.K. Inspirational Award.

L3Harris' Lou Speaight at the Women in Defence UK Awards 2024 ceremony

Editorial | 11. 27. 2024

L3Harris’ Lou Speaight is a Finalist at Women in Defence UK Awards 2024

Brigadier Adam Fraser-Hitchen ADC DL, Deputy Commander of 3rd UK Division, presents Silver ERS Award to ules Ball (L3H UK CHQ) and Henry Watts (IMS MAR Bristol)

Editorial | 11. 26. 2024

L3Harris in the UK Achieves Silver ERS Award Status

Three people hold award designation

Press release | 11. 20. 2024

L3Harris Achieves UK Defence Employer Recognition Award

L3Harris CORVUS open, agile multi-role electronic warfare architecture.

Editorial | 09. 19. 2024

Electronic Warfare Key to Indo-Pacific Power Projection Under AUKUS Framework

FPGA Engineering Students using Scratch VHDL

Editorial | 07. 31. 2024

L3Harris Facilitates Bringing FPGA Engineering Skills to Local UK Schools

Contact the Robotics Team

Address

Related Domains & Industries

Solutions that solve our customers' toughest challenges.
view all capabilities